Control Units

This is the heart of your Frolight System.

This Slave unit is used when a Frolight System exceeds 1200 meters, with this slave unit another 1200 meters of IR-TUBE can be attached to the system. The Slave module will automatically connect to the Master control unit via a wireless connection and transfer all data. This data can be viewed in the MyFrolight Platform.
As extra safety there's a manual switch to overrule electronics and turn on the IR-TUBES.

The Frolight generator starter is a self-contained device with its own battery and solar panel, operating based on temperature. When the temperature falls below a preset level, it closes a potential-free (dry) contact. This contact can be connected to almost any brand of generator, enabling the generator to start automatically when required.

This Temperature sensor can be added to your Frolight system to capture the dry temperature at a second position.

This metal base is used to install the Frolight Control Unit at height. One is already included for every control unit bought.

For Max 600 meters of Frolight IR-TUBE

This cable is used to extend the length of the power cable of a control unit with 5 meters

Extension cable that can be used to extend the power cord of a Frolight Control Unit Master or Slave

This cable is used to extend the length of the power cable of a control unit

Extension cable that can be used to extend the power cord of a Frolight Control Unit Master or Slave

Extension cable that can be used to extend the power cord of a Frolight Control Unit Master or Slave

Extension cable that can be used to extend the power cord of a Frolight Control Unit Master or Slave

Extension cable that can be used to extend the power cord of a Frolight Control Unit Master or Slave

This cable is used to extend the length of the power cable of a control unit